ResMed ApneaLink User Manual

2
2. Click “Install ApneaLink.”
Follow the prompts from the installation software.
Note: The „Install Acrobat Reader“ option is not displayed if the program
has already been installed.
3. Connect ApneaLink directly to the USB connection of your PC when
asked to.
Note: Do not connect ApneaLink to a USB Hub.
4. After completion of the installation process, click “Exit” to close the
dialog box.
5. Remove the installation CD from the CD drive, and store in a safe place.

ResMed ApneaLink Specifications

General

Data Storage	Internal memory
Device Type	Home Sleep Apnea Testing Device
Measurements	Airflow, respiratory effort, pulse rate, oxygen saturation
Software Compatibility	ResMed ApneaLink software
Battery Life	Up to 10 hours
Intended Use	Diagnostic screening for sleep apnea