ResMed ApneaLink User Manual

1
Quick Setup Guide
Important Notes
Do not connect the recorder to your computer until prompted to do so by the
ApneaLink software. This is essential in order to ensure the correct installation
of the USB driver files and data exchange between the computer and recorder.
The installation dialog is performed in the language set on your computer.
The ApneaLink PC software can only process folder and file names according to
ISO 8859-1 (Latin Western Europe) and ASCII. Unicode is not supported.
Once the ApneaLink program has been installed, for data protection reasons
the user is responsible for ensuring that use of the program and access to the
data is restricted to authorized users.
If problems should arise with the display of reports, install the latest version of
Acrobat Reader for your particular operating system.
Installation
1. Insert the ApneaLink CD into the CD drive of your computer.
The installation process will start automatically.
Note: If installaton does not start automatically, double-click the “My computer”
icon on the desktop and open the “Setup.exe” file in the CD drive directory.
English
ApneaLink™

ResMed ApneaLink Specifications

General

Data Storage	Internal memory
Device Type	Home Sleep Apnea Testing Device
Measurements	Airflow, respiratory effort, pulse rate, oxygen saturation
Software Compatibility	ResMed ApneaLink software
Battery Life	Up to 10 hours
Intended Use	Diagnostic screening for sleep apnea