ResMed Tx Link - Technical specifications

Technical specifications 7
Technical specifications
Tx Link dimensions (H x W x L) 1.9" x 5.7" x 4.9" (47 mm x 145 mm x 123 mm)
Tx Link weight 0.77 lb (350 g)
Power pack dimensions
(H x W x L)
4.2" x 2.4" x 1.4" (106 mm x 60 mm x 36 mm)
Power Pack weight 0.55 lb (250 g)
Power supply AC 100–240V, 50–60Hz
< 12VA maximum power consumption
Class II, suitable for continuous operation
Housing construction Aluminum and flame retardant engineering thermoplastic
Operating temperature
+41
o
F to +95
o
F (+5
o
C to +35
o
C)
Operating humidity 10%–95% non-condensing
Storage and transport
temperature
-4
o
F to 140
o
F (-20
o
C to 60
o
C)
Storage and transport humidity 10% to 95% non-condensing
Operating altitude Sea level to 10,000 ft (3050 m)
Analog outputs 6
All channels isolated from
mains
1.5kV
All channels isolated from
communications signals
1.5kV
No isolation between channels
Voltage range ± 1V
Accuracy ± 20 mV
Bandwidth 100Hz
Output impedance
50
Electromagnetic compatibility: Product complies with all applicable electromagnetic
compatibility requirements (EMC) according to IEC60601-1-2,
for commercial and light industry environments. Information
regarding the electromagnetic emissions and immunity of
these ResMed devices can be found on www.resmed.com,
on the Products page under Service and Support. Click on
the PDF file for your language.
IEC60601-1 classification Portable Equipment
Notes:
• The manufacturer reserves the right to change these specifications without
notice.
• The performance of the analog outputs is determined by the attached
ResMed therapy device.
