Reset
RESE
Reset function
By means of the reset function, all adjustments can be set back to their factory
settings.
Î In order to carry out a reset, press button 3
All adjustments that have previously been made will be lost! For this reason, a secu-
rity enquiry will appear after the reset function has been selected.
Only confirm the security enquiry if you are sure you want to set back all adjust-
ment to the factory setting.
Security enquiry
Î In order to confirm the security enquiry, press button 3.
Note:
After a reset, the commissioning menu will start again (see page 11).
To Next Page
Loading...
