EasyManuals Logo

ReSound 10 CIC User Manual

ReSound 10 CIC
13 pages
To Next Page IconTo Next Page
To Next Page IconTo Next Page
To Previous Page IconTo Previous Page
To Previous Page IconTo Previous Page
Page #5 background imageLoading...
Page #5 background image
8
9
SmartStart
SmartStart allows you the possibility for inserting the instru-
ment in the ear without annoying sounds like squealing. It
delays the switch on time 10 seconds after closing the bat-
tery compartment, and is indicated by a beep every second
after closing the battery compartment.
Low Battery Warning
When the battery voltage/power decreases to a low level,
the instrument will inform you by a soft low-battery-warning
signal (beep-beep). The signal indicates you should replace
the battery, why it is recommended that you always keep a
spare battery. The battery-warning signal will be repeated
every 5-10 minutes until the battery runs out of power. The
instrument will then automatically switch off.
Volume Control (optional)
Your instrument might be equiped with a volume control.
With the volume control you can turn the volume up and
down. When wearing the instrument, you can increase the
volume by turning the volume control wheel towards the
front, and reduce volume by turning it towards the back.
For each volume step, you will hear a “beep”
signal indicating the change. If you reach
the upper or lower limit of the volume
control range, there will be a different
type of “beep” signal with a lower
pitch. Please note that your instru-
ment has been tted by your hear-
ing care professional and that your
hearing loss has required a certain
amount of amplification.
This means that you may not be
able to increase the volume as
much as you can decrease it.
Insertion of the Hearing Instrument
To insert the hearing instrument into your ear:
1. Grip the instrument with your thumb and forefinger, either
above and below or on the sides (as shown) with the pro-
gramme selector on top.
2. Place the sound outlet portion into your ear canal.
3. Insert the hearing instrument carefully with a slight “cork-
screw” motion.
By experimenting, you may find a method that is easier
for you. When properly inserted, the instrument should fit
comfortably and tightly in your ear. It is important that the
custom shell fits correctly into your ear. If your hearing in-
strument irritates your ear in any way and prevents you from
wearing your hearing instrument, please contact your hear-
ing care professional to have the custom shell modified. You
should never attempt to modify the shape of the custom
shell yourself.

Questions and Answers:

Question and Answer IconNeed help?

Do you have a question about the ReSound 10 CIC and is the answer not in the manual?

ReSound 10 CIC Specifications

General IconGeneral
BrandReSound
Model10 CIC
CategoryHearing Aid
LanguageEnglish

Related product manuals