What to do if my ReSound FT862-DRW Hearing Aid has no sound?
If your ReSound Hearing Aid has no sound, first ensure that the device is switched on. If it is in telecoil mode, switch to the microphone program. Check if a battery is inserted, and if so, replace it with a new one to ensure it's not depleted. For clogged or broken tubes or earmolds, visit your hearing care practitioner. If your ear is full of wax, visit your physician.
Why is my ReSound FT862-DRW Hearing Aid whistling?
If your ReSound Hearing Aid is whistling, make sure your earmold or dome is correctly inserted; if not, reinsert it. If the volume is too loud, reduce it. For clogged or broken plastic tubes or earmolds, replace them or visit your hearing care professional. Ensure you are not holding objects too close to the hearing aid. If earwax is the problem, visit your physician.
What to do if my ReSound Hearing Aid sound is distorted?
If the sound from your ReSound Hearing Aid is distorted, spluttering, or weak, replace the battery with a new one. If the battery is dirty, clean it or replace it. For clogged or broken plastic tubes or earmolds, visit your hearing care professional. If your hearing aid got moist, use a desiccant.
General| Brand | ReSound |
|---|---|
| Model | FT862-DRW |
| Category | Hearing Aid |
| Type | Behind-the-Ear (BTE) |
| Receiver Type | Receiver-in-Canal (RIC) |
| Channels | 16 |
| Gain | up to 70 dB |
| Battery Size | 312 |
| Wireless Connectivity | Yes |
| Water Resistance | IP68 |
| Battery Type | Zinc Air |
| Battery Life | 7-10 days |
| Bluetooth Compatibility | Yes |
To Next Page
