①ANT
Connect an external antenna to this terminal . When making test transmissions, connect a
dummy load in place of the antenna. The antenna system or load should have an impedance
of 50 Ω .
② SP (SP 1/ SP 2)
If desired, connect 1 or 2 external speakers for clearer audio. These jacks accept 3.5 mm (1/8")
diameter, 2-conductor plugs.
Button Customization Operation
The functions of the [PF1]/[PF2]/[PF3]/[PF4] buttons on the microphone can be dened by
the user.
The denition method is as follows:
1. Sho press the [F] button + tuning knob to enter the menu mode.
2. Rotate the tuning knob to menus 509-512, which correspond to the 4 buttons
[PF1]/[PF2]/[PF3]/[PF4] respectively.
3. Sho press the tuning knob, then rotate it to select the function option of the correspond-
ing button.
4. Press the tuning knob to save the set value. If you want to dene other buttons, rotate the
tuning knob and repeat the above steps.
5. Press the tuning knob to save and exit.
MICROPHONE Microphone Jack
9
1
2
To Next Page
Loading...
