Retevis MA1 - Advanced Features; Scan Function

Advanced Features
Automatic Repeater Oset
This function automatically selects an oset direction and activates the Tone function,
according to the frequency that you have selected.
To obtain an up- to-date band plan for repeater oset direction, contact your national
Amateur Radio Association.
1.Enter Menu mode and access Menu 401 (ARO)
2. Set the ARO to ON.
3. Press [BAND SEL A] to select the A band.
4. Press [VFO] to select VFO mode.
5. Rotate the Tuning control to select your desired frequency.
Scan Function
This transceiver provides the following types of scans:
1.VFO SCAN
1)VFO Scan monitors all frequencies tunable on the band, using the current frequency step
size.
2)Select your desired band.
3)Press [VFO] (1s).
4)Scan stas at the current frequency.
5)The 1 MHz decimal blinks while scanning is in progress.To reverse the scan direction, turn
the Tuning control clockwise (upward scan) or counterclockwise (downward scan). You can
also press microphone [UP]/ [DWN].
6)To quit VFO Scan, press [VFO] again.
2.MEMORY Channel SCAN
Use Memo Scan to monitor all Memo channels programmed with frequency data.
1)Select your desired band.
2)Press [MR] (1s).
Transmit/uplink Noise
Cancellation
Noise Cancellation with
VOX
610
998
998
609
OFF
OFF
VFO
OFF/1/2/3/4
Set the PASSWD in the CPS
VFO/PART/FULL
OFF/ON
VOX
PASSWD Power on password
ResetRESET
TX ANC
Scan Types
VFO Scan
Memo Scan
Program Scan
MHz Scan
Call Scan
Description
Scans all frequencies on the current band.
Scans all frequencies stored in the Memo channels.
Scans all frequencies within the programmed range, on the current band.
Scans all frequencies within a 1 MHz range from the originating frequency.
Scans the Call channel as well as the currently selected VFO frequency or
Memo channel.
16