RetroSound Model Two - Advanced Tone Frequency Adjustments

Model Two Owner’s Manual
Copyright 2014 © Retro Manufacturing, LLC Page 23
FADER
The fader control allows you to fade
the sound from the front pair of
speakers to the rear pair of speakers.
Adjustment range is 0-12 between
front and rear speakers.
XBAS
This funcon boosts bass and treble
at low listening volume and should be
turned o at higher volumes. You will
know this funcon is acve when you
see “XBAS” on your display. Adjusng
your Bass, Mid or Treble sengs will
override the XBAS funcon.
SUB ON/OFF
Turn the subwoofer RCA output ON
to acvate this feature.
SUB VOL
When SUB ON is selected and a
subwoofer is aached to the unit, use
this funcon to increase or decrease
the volume level of the subwoofer
outputs from 0-12.
SUB
When SUB ON is selected and a
subwoofer is aached to the unit, use
this funcon to adjust the subwoofer
crossover point to 80HZ, 120HZ or
160HZ.
XBAS OFF
SUB OFF
SUB 120H
SUB VOL 10
FAD 00