RetroSound Model Two - Warnings and Precautions; General Usage and Safety Precautions

Model Two Owner’s Manual
Copyright 2014 © Retro Manufacturing, LLCPage 6
Warnings and Precautions
This equipment has been tested and found to comply with the limits for a Class
B device, pursuant to Part 15 of the FCC Rules. These limits are designed to pro-
vide reasonable protecon against harmful interference in a residenal instal-
laon. This equipment generates, uses and can radiate radio frequency energy,
and, if not installed and used in accordance with instrucons, may cause harm-
ful interference with radio communicaons. However, there is no guarantee
that radio interference will not occur in a parcular installaon. If this equip-
ment does cause harmful interference to radio or television recepon, which
can be determined by turning the equipment o and on, the user is encouraged
to consult the dealer or an experienced radio/TV technician for help. You are
cauoned that any changes or modicaons not expressly approved in this
manual could void your authority to operate this equipment.
Observe these warnings and precauons when using this unit:
• Carefully read this manual before using the unit. If you encounter any
problems that are not covered in this manual, please consult the dealer
from which you purchased the unit or the dealer nearest you. You may also
email us at support@retrosound.com.
• Do not turn the unit on if the temperature inside the car is very high.
Always allow the unit to cool down before usage.
• The driver should neither watch the display nor operate the system while
driving. Watching the display or operang the system will distract the
driver from driving safely and can cause accidents. Always stop the vehicle
in a safe locaon and use the parking brake before watching the display or
operang the system.
• Use the proper power supply. This product is designed for operaon with
a negave ground 12V DC baery system. Never operate this product with
other baery systems, especially a 18/24V DC baery or posive ground
system.
• Do not disassemble or modify the unit. Do not disassemble, modify the
unit or aempt to repair the product yourself. If the product needs to be
repaired, consult your dealer or Retro Manufacturing directly.
• Do not use the unit when it is out of order. If the unit is out of order (no
power, no sound) or in an abnormal state (has foreign objects in it, is ex-
posed to water, is smoking, or smells), turn it o immediately and consult
your dealer.