Retsch SM300 - Removing Transport Safeguards; Mounting the Feed Hopper; Removing the Transport Safeguard

Transport, scope of delivery, installation
11
NOTICE
Atmospheric humidity
– Electronic and mechanical components may be damaged and the
performance data alter to an unknown extent.
• Do not exceed the admissible range for atmospheric humidity.
3.5 Removing Transport Safeguards
Fig. 1: Removing Transport Aid
Lift the device only by the transport aid (TH). The weight of the device is approx.
160 kg. Choose a safe lifting sling that is approved for this weight.
Keep the eye bolt (TH) for transport again at a later date.
The eye bolt must be removed before the hopper is assembled.
3.6 Mounting the Feed Hopper
WARNING
1.W0004
Risk of injury to skin and hands
Fast rotating cutting blade
– There is a risk of injuring hands, fingers and skin.
• Never operate the device without a feed hopper.
NOTICE
Transport safeguard
– Components may be damaged.
• Operate the machine only without the transport safeguard or
transport the machine only with transport safeguard.
3.6.1 Removing the Transport Safeguard
TH