Retsch SM300 - 9 Fault Messages

Fault messages
37
9 Fault messages
F.01
Overload
Frequency converter switched off because of overloading
F.04
Open the door
Close the door and close the lock.
F.04.-
Open the lock
Close the lock
F.11
Engine is overheated.
Starting impossible. Please wait until it cools down.
F.15
Fault in the safety circuit of the
frequency converter activation
Door switch opened,
Handle switch opened,
The motor-driven lid lock monitoring has detected a fault.
F.18
Fault in the transformer’s safety
circuit
Contact monitoring Relay Inrush current limiter
F.26
Excessive temperature
frequency converter
Frequency converter is overheated
F.37
No communication with the
frequency converter
Frequency converter does not respond
(4 seconds after start)