Need help?Do you have a question about the Retsch AS 200 and is the answer not in the manual?
Legal disclaimer regarding document accuracy and liability for misuse.
Restrictions on reproduction, distribution, and editing of the document content.
Explanation of symbols, danger, warning, and caution notices used in the manual.
Essential safety guidelines for operating personnel and device handling.
Information on authorized repair services and contact points for necessary repairs.
Specifies the ingress protection rating (IP) for the device.
Information on acoustic emissions, noise levels, and hearing protection.
Details on the device's EMC classification and susceptibility to interference.
Provides the physical dimensions and weight of the device.
Guidelines for installation site, including space requirements and stability.
Details on the acceptable particle size range for feed material.
Information on maximum sample quantity, sieve stack weight, and payload.
Instructions and warnings for safe transportation of the device.
Requirements for the installation environment, including temperature and humidity.
Safety instructions and requirements for connecting the device to the mains.
Step-by-step instructions for removing the transportation lock safely.
Detailed steps for installing the economy and standard sieve clamping units.
Detailed steps for installing the comfort sieve clamping unit.
Defines the device's intended application and crucial safety precautions.
Describes the vibratory sieving mechanism and the drive system.
Illustrates and describes the front and back views of the device.
Instructions for turning the device on, off, and entering standby mode.
Step-by-step guide for setting up and executing a sieving operation.
Details on buttons, displays, and their functions for device operation.
Instructions for starting, stopping, and pausing the sieving process.
Guidance on setting amplitude, time, and optimization for sieving.
Information on interval operation and programme mode for advanced control.
Steps for mounting the splash protection unit before wet sieving.
Detailed instructions for performing sieving with liquids.
Lists error codes, their descriptions, and recommended corrective measures.
Explains information codes and their meaning for user guidance.
Procedures for cleaning the device housing and test sieves.
Guidance on checking test sieves and gaskets for wear and damage.
Instructions for essential maintenance tasks, including support rod adjustment.
Detailed steps for safely replacing the device's fuses.
Details on Retsch test sieve quality, standards, diameters, and surfaces.
Information on mechanical, solid, and liquid aids to improve sieving.
How to use an add-on weight to achieve desired amplitude with low sieve stack mass.
General| Model | AS 200 |
|---|---|
| Type | Sieve Shaker |
| Power Supply | 230 V, 50/60 Hz |
| Time display | digital |
| Sieve Diameter | 203 mm (8") |
| Amplitude | 0 - 3 mm |
| Time Setting | 1 - 99 minutes |
| Max. number of sieves | 8 |
To Next Page