Table of Contents
1 Notes on the Manual ............................................................................................................................. 6
1.1 Disclaimer .......................................................................................................................................... 6
1.2 Copyright............................................................................................................................................ 6
1.3 Explanations of the Safety Instructions ............................................................................................. 7
1.4 General Safety Instructions ............................................................................................................... 8
1.5 Repairs ............................................................................................................................................... 9
2 Confirmation Form for the Managing Operator ................................................................................ 10
3 Technical Data ..................................................................................................................................... 11
3.1 Degree of Protection ........................................................................................................................ 11
3.2 Emissions......................................................................................................................................... 11
3.3 Electromagnetic Compatibility (EMC) .............................................................................................. 12
3.4 Rated Power .................................................................................................................................... 12
3.5 Dimensions and Weight ................................................................................................................... 12
3.6 Required Floor Space ...................................................................................................................... 12
3.7 Receptacle Volume .......................................................................................................................... 12
3.8 Feed Grain Size ............................................................................................................................... 13
3.9 Payload ............................................................................................................................................ 13
3.10 Suitable Sieve Diameters ................................................................................................................ 13
4 Packaging, Transport and Installation .............................................................................................. 14
4.1 Packaging ........................................................................................................................................ 14
4.2 Transport.......................................................................................................................................... 14
4.3 Temperature Fluctuations and Condensation ................................................................................. 14
4.4 Conditions for the Installation Site ................................................................................................... 15
4.5 Electrical Connection ....................................................................................................................... 16
4.6 Type Plate Description ..................................................................................................................... 16
4.7 Removing the Transportation Lock .................................................................................................. 17
5 First Commissioning ........................................................................................................................... 19
5.1 Sieve Clamping Unit "economy" and "standard" ............................................................................. 20
5.2 Sieve Clamping Unit "comfort" ......................................................................................................... 20
6 Operating the Device .......................................................................................................................... 23
6.1 Use of the Device for the Intended Purpose .................................................................................... 23
6.2 Principle of Operation ...................................................................................................................... 24
6.3 Views of the Instrument ................................................................................................................... 25
6.3.1 Front ............................................................................................................................................. 25
6.3.2 Back ............................................................................................................................................. 26
6.4 Switching On / Off ............................................................................................................................ 27
6.5 Selection of the Test Sieves ............................................................................................................ 27
6.6 Performing a Sieving ....................................................................................................................... 27
7 Controlling the Device ........................................................................................................................ 29
7.1 Operating Controls, Displays and Functions ................................................................................... 29
7.2 Start Process ................................................................................................................................... 29
7.3 Stop Process ................................................................................................................................... 30
7.4 Pause Process ................................................................................................................................. 30
7.5 Amplitude ......................................................................................................................................... 30
7.5.1 Amplitudes in Dependence on the Load ...................................................................................... 31
7.6 Time ................................................................................................................................................. 32
7.7 Optimisation of Time and Amplitude ................................................................................................ 32
7.8 Interval ............................................................................................................................................. 33
7.8.1 Interval Time ................................................................................................................................ 34
7.9 Programme Mode ............................................................................................................................ 34
7.9.1 Select a Programme .................................................................................................................... 34
7.9.2 Edit a Programme ........................................................................................................................ 34
To Next Page
Loading...