Reverse Tap RD B1 - Security Mode Operations; Using Security Mode; Changing Settings with Security Lock

15
Security Mode
Security Mode
Setting Lock : OFF
Dispensing Lock : OFF
Password : ****
• Setting Lock : A function to lock the settings (Foam control, LED colors, etc.)
• Dispensing Lock : A function to lock the valve from dispensing even if a cup is inserted.
How to use Security Mode
• Turn “ON” Setting Lock or Dispensing Lock.
• Input 4-digit password. (Default password: 1234)
- Long pressing the Set button without setting any password will automatically set as
default password. Thus, you may set password only if you prefer.
• To save, long press the SET button. This will switch back to the Standby status.
How to change the settings ( while Setting Lock is ON )
• In Standby status, long press the Set button. It will ask for a password with a screen
“Settings are locked.”
• Input the correct password to enter the settings mode.
- This does not change the password. This is only for entering the settings mode.
- Setting Lock is continuously ON after entering password.
To turn this OFF, enter the Security Mode.
- If wrong password is entered, the screen will show “Incorrect password!” and return to
Standby status(Ready screen).
※ To enter the Advanced settings, you may proceed as the same process above.
Settings are locked
Password : *2**