Reverse Tap RD B1 - Time and Volume Dispensing Modes; Configuring Preset Sizes in Time Mode

1. TIME Mode * Used when a flow sensor is lost or malfunctioning.
• Controls the dispensing amount with the duration of valve-opening time.
2. VOLUME Mode (Default)
• Controls the dispensing amount with the set volume measured by a flow sensor.
TIME / VOLUME Mode
• TIME / VOLUME : Press Up and Down button to select one of the options.
SMALL
5.8 s
11.5 oz
Size-setting Mode in
TIME Mode
How to change the PRESET size in TIME Mode
SMALL
11.5 oz
Size-setting Mode in
VOLUME Mode
TIME
VOLUME
• Small / Medium / Large : Press Up and Down button to select a size.
• s (seconds) : Press Up and Down button to input dispensing time for each size.
- In TIME Mode, press Up and Down button to adjust dispensing time by 0.1.
- Estimated volume is shown below dispensing time.
Estimate volume rate : 62.5 mL / sec.
- This rate is adjustable by adjusting Flow rate value (Keg Alarm Mode).
17