NETWORKS
7
1.800.274.5308 \\ revgennetworks.com
Login to Your IQMC Settings and
Configuration User Interface
• You can login to your router’s Web User Interface (Web UI) to access and change any
of your router’s settings and functions, such as Wi-Fi security.
• You can also access network information such as connected devices and data usage.
• You can login to the Web UI using a computer, cellphone or tablet.
• First connect your device to your router, then access the Web UI, as shown below.
Your router is pre-set with WPA2 security, but it is always recommended to change
the default Wi-Fi password.
1
3
2
4
Plug the IQMC into a power
outlet with the included
power adapter.
You can connect your devices to
the IQMC’s Wi-Fi network named
SparQ-#######. You can find the
login information on the label
underneath the IQMC, or on the
box. You can also connect internet
devices by using the Ethernet
cable and connecting one end to
a LAN port on the IQMC, and the
other end to your device’s
Ethernet port.
Wait
at least 5 minutes for
router to establish a cell
connection & automatically
perform necessary updates.
Proceed once the SYSTEM
LIGHT stops blinking.
Follow the steps in the next
section to configure settings
such as your Wi-Fi password.
SETTING UP
To Next Page
Loading...
Need help?
General