20
Instructions for use
g Press the body pads on the area you wish to apply
electrical stimulation, as shown on page 17, gently
pressing the adhesive side against the skin.
h Press the power button on the device or on the
remote control to turn REVITIVE Advanced on.
You will hear a beep and the display lights will light up.
The time will read 30 minutes and Intensity will
read 00.
To turn off REVITIVE at any time during operation,
press the power button on the device or remote
control.
i Press the (+) Intensity Control, one time, to
start stimulation.
Continue to increase the intensity until you can feel or
see the muscles contract and relax. You can set the
intensity between 1-99.
You can use the buttons on the device or remote
control.
Press the (+) button to increase the level.
Press the (–) button to decrease the level.
To Next Page
Loading...
