1. Integration of an A100 into the domestic network via Wi-Fi / LAN
The A100 derives its functionality mainly from streaming content from the Internet. For complete control, the A100
communicates with the STUDIOART app, which must also be in the same network as the A100. This chapter explains the
possibilities of integrating the A100 into the home network.
Integrating the A100 in the local network using WPS * function
1. Start A100 and bring it into the immediate vicinity of the router.
2. The WPS routine must be completed within 2 minutes.
3. Bring the A100 into WPS mode:
+ hold for approx. 10 sec. - Status LED flashes periodically 3 in succession
4. Press the WPS button on the router. Some routers also have names such as "Log in" or "Connect"
5. If the A100 has been detected, it is now automatically in the router's Wi-Fi network. It requires no additional input of the
wireless key.
* Automatic connection process of WLAN products. Both devices, router and wireless product must support WPS. For some
routers, WPS is disabled at the factory and must first be enabled in the settings.
To Next Page
Loading...
