Source and music selection
List selection
Play view
Selects the TIDAL music subscription service. TIDAL is natively integrated into the
STUDIOART app, i.e. all functions are executed in the STUDIOART app.
Selects the Deezer music subscription service. Deezer is natively integrated into the
STUDIOART app, i.e. all functions are executed in the STUDIOART app.
The Airplay icon is an indicator, not an active source. Airplay is selected by an Apple
device, which uses the A100 as a playback device. In the STUDIOART app (also on
Android devices) it only shows whether the A100 is being used as an Airplay source.
Selection of the analogue analogue input Analog IN, which is located on the back of
the A100. This input is equipped with an input detection, i.e. as soon as a signal is
present at the input, the A100 switches to the analog IN source
In the
third step you can select from pre-sorted lists which provide the respective
sources or via search functions, the desired title or station. The example on the left
shows the list selection of iRadio with the category Popular Stations.
Note: Special feature iRadio
Here you can also use the 3-point icon on the right to add the corresponding channel
to one of the 5 presets, which can then be selected directly via the A100 touch
interface without using the STUDIOART app.
The options in the individual headings are flexible and can change over time. For the
sources Bluetooth and Analog IN, there are no selection lists. Here you are led
directly into the playback view, the so-called PlayView.
The
fourth step is Playback View. Here the music title or source is displayed with the
cover. In addition, the volume can be adjusted in the range of 0-100% via the volume
slider at the bottom. The center pause / play button also pauses the playback. After
about 20 minutes in “pause” mode, the A100 automatically goes into standby. Some
sources also offer the Next and Previous control buttons.
Note: Special feature iRadio
Here you can also use the 3- point icon on the right to add the corresponding channel to
one of the 5 presets, which can then be selected directly via the A100 touch interface
without using the STUDIOART app.
To Next Page
Loading...
