Integrating A100 in the local network using an Apple device
1. Download and install the STUDIOART App from the Apple App Store for free.
2. Activate A100 hotspot mode: + hold for approx. 5 sec - status LED flashes slowly
A100 sets up its own WLAN (WAC)
3. In the Wi-Fi settings of the Apple device, select the A100 as the detected Airplay speaker and follow the Apple
configuration guide.
4. The A100 is displayed as STUDIOART loudspeaker in the second line of the app and can be given a new name in the setup.
Integrating A100 into the local network using an Android device
1. Download and install STUDIOART App from the Google Play Store for free.
2. Press the text line "This line long ..." in App
3. Follow the 4 steps which the app shows with graphics and text:
a) Activate A100 hotspot mode:
+ hold for approx. 5 sec - Status LED flashes slow
A100 builds its own WLAN (WAC)
b) In the WLAN settings, select the A100 (WLAN name: RevoxA100-xxxx)
c) Select the desired future WLAN network and enter the corresponding WLAN key
d) In Network settings, select the WLAN in which the A100 is playing
To Next Page
Loading...
