Deskside and Office 230vissue7 3 01/02/02
ILLUSTRATED PARTS MANUALS
SERIES 7 SHREDDERS – 230V
DESKSIDE AND OFFICE MODELS
PREFACE
This manual provides the instructions for the replacement of all the components that may become worn
or damaged. Details of replacement parts and ordering information are given in associated illustrated
parts list.
Illustrated Parts Lists
For each machine, these give full details of the replacement part numbers with supporting diagrams to
show the location of the components.
Service Instructions
For each machine, these give the recommended servicing procedure with supporting pictorial diagrams
for added clarity and applies from the following serial nos:-
250 S2 A629960 250 S3 A630080 250 S4 A630120
250 S5 A630130 1150 S2 A631455 1150 S3 A630180
1250 S2 A629166 1250 S3 A634672 1250 S4 A630205
1250 S5 A629281
WARNING
1. Check the machine RATING PLATE DETAILS are compatible with the electrical mains supply.
2. Disconnect the electrical mains supply before removing any covers.
3. After removing the cover on single phase machines, DISCHARGE the capacitor by shorting out its
connections. (BEWARE: PAPER DUST IS A POTENTIAL FIRE HAZARD).
4. The machine MUST have a sound Electrical Earth connection.
NOTE: THE ELECTRIC MOTOR IS PROTECTED BY AN AUTOMATIC THERMAL
OVERLOAD CUT-OUT.
To Next Page
Loading...
