15
Gravity Sensing Record:
The Gravity Sensing detects significant or sudden movement (such as an
impact or collision), it will trigger an event recording. We suggest setting the
“Gravity Sensing” to High sensitivity for Parking Mode Recording.
Note:
If you do not use the parking mode function, please change the Gravity
Sensing sensitivity to low. Otherwise, the video will easily be locked and the
video cannot be deleted by the loop recording function. This will cause the
memory card to be full of locked videos and cause the recorder to fail to
work normally.
Please DO NOT ENABLE the Parking Monitor function in the settings of the
dash cam WITHOUT connecting a smart hardwire kit. They may cause a
malfunction.
Option 2: Motion Detection
To use this feature, you need to connect it with a Rexing Intelligent Hardwire
Kit (sold separately). Make sure that the Parking Mode is turned off on your
dash cam, otherwise it may cause a malfunction.
Once the sensor has detected MOTIONS. The intelligent hardwire kit will
power up the dash cam automatically and start recording until the MOTION
is cleared.
Please go to https://www.rexingusa.com/hwk-install/
to watch a video tutorial about the installation or scan the QR code below.
To Next Page
Loading...
