19
Battery is mainly used to save files in emergency. Please
always connect dash cam to external power while it is in
use.
When device detects no power supply, it will
automatically power off after 5 seconds. To turn on the
device again, you will need to do so manually by pressing
the ON / OFF button.
If the battery is completely discharged, the device will not
turn on immediately when the charger is connected.
Allow a depleted battery to charge for a few minutes
before attempting to turn on the device.
The device can be used while it is charging, although it
may take longer to fully charge the battery.
If the device receives an unstable power supply while
charging, the screen may not function properly. If this
happens, unplug the charger from the device.
While charging, the device may heat up. This is normal
and should not affect the device’s performance or
lifespan.
Connecting the charger improperly may cause serious
damage to the device. Any damage caused by misuse is not
covered by the warranty.
To Next Page
Loading...
