Optional Connection Methods
USB terminal can be connected to an AC adaptor/ a portable battery.
12
Portable battery 5V 2.0A (optional) AC Wall Charger (Not Included)
Warning
• AC adaptor and portable battery require 5V/2.0A output. If the
portable battery is in a low power, it will start normally.
• When you connect your camera to USB power cable, if there is no
sufficient electric current, the GPS receiver will be not able to work.
Even through sometimes these problems occur, but they are not
faulty.
!
Hardwire Kit Connection
Hardwire Kit
Connect to the Hot Fuse
Ground
Connect to the Switched Fuse
To Next Page
Loading...
