18
Warning
If the dash cam detects an error, (for example: lens terminal
connection cable disappears, microSD card lost, insufficient storage
or disconnected), a warning notice will be displayed on the screen
with a warning voice. Eliminate the notice and voice by pressing any
button on the monitor.
Under the video filming mode, pressing for about 3 secs to open menu setting
page, so you can change settings
!
Menu Setting
1. Video resolution: FHD/HD
2. Loop Recording: 1/2/3/5/10 minutes *1-minute cycle is recommended
3. Mic: ON/OFF
4. Volume: Standard/Low
5. Beep: ON/OFF
6. Start-up/Shutdown voice: ON/OFF
7. Time setting: set your dash cam’s date and hour
8. Date Format: set your date and hour display format
9. Stamp Format: Date and hour + model type/Date/model type/OFF
10. Language: ENGLISH/简体中文/繁體中文/日本語
11. Flicker: automatic/50Hz/60Hz
12. LCD Power Saver: OFF/1 min/3mins
13. G-Sensor: OFF/High/Middle/Low
14. GPS: ON/OFF
15. Time zone: setting time zone
16. System setting: charging system
17. Format SD card: YES/NO
18. Hardware version: show current version
To Next Page
Loading...
