15
8. Remote control cable
9. Power connection port
9-1: Powered by Smart hardwire kit
9-2: Powered By USB cable
10. Monitor mount socket
Install the dash cam monitor and fix with the quick release plate
11. Emergency Video
Press: switch front and rear lenses display mode.
Hold for about 3 secs to start Emergency Video, after entering the Emergency
Video Mode, hold for another 3 secs to cancel the mode. Emergency Video Mode
automatically locks the recorded footage.
12. Remote control RESET button
Use a pin to restart the camera.
13. Monitor RESET button
Use a pin to restart the camera
14. LED light display
Filming: red light on, flashing blue light.
15. 3" LCD Screen
Not a touch screen.
16. GPS Logger Port
To Next Page
Loading...
