Rexing V1-4K - Page 14

13
Connect USB
connector to
computer
Select Mass
Storage
During playback use the OK (pause), MIC (fast forward),
and REC (rewind) buttons to control the video playback.
To playback a video on the computer, either use an SD
card adapter or connect he device to the computer
directly using the USB to Mini USB cable.
To playback a video using
an SD card adapter, remove
the memory card and insert
it into an SD card adapter.
Place the adapter in the
computer.
To playback a video using
USB cable, connect the
USB Cable to the device
and the computer. After
the device powers up,
press the OK Button to
select Mass Storage.
On the computer,
navigate to the device
drive. The video are stored
at: \CARDV\MOVIE.
Select the video to
playback.