Rexing V1P - GETTING STARTED; Device Layout

16
During playback use the OK
(pause), MIC (fast forward) and
REC (rewind) buttons to control the video playback.
To playback a video on the computer either use an SD card
adapter or connect the device to the computer directly using
the USB to Mini B 5pin male cable.
To playback a video using
an SD card adapter,
remove the memory card and
insert it into an SD card
adapter. Place the adapter in
the computer.
To playback a video
using USB cable, connect
the USB Cable to the device
and the computer. After the
device powers up, press the
OK Button to select Mass
Storage.
On the computer, navigate
to device drive. The videos
are stored at: \CARDV\
MOVIE. Select the video to
playback.
Connect USB
connector to
computer
Select Mass
Storage