Rexroth Indramat DKC01.3-100-7

Need help?

Do you have a question about the Rexroth Indramat DKC01.3-100-7 and is the answer not in the manual?

Summary

2 Important directions for use

3 Safety Instructions for Electric Drives and Controls

3.3 Hazards by Improper Use

Details potential hazards like electric shock, dangerous movements, and thermal risks from improper use.

3.5 Protection Against Contact with Electrical Parts

Provides safety measures for preventing contact with live electrical parts, including waiting for capacitor discharge.

4 ECODRIVE03 DKC.040, DKC.100, DKC**.200

4.1 Technical Data

Provides technical specifications including dimensions, ambient conditions, and electrical data for DKC drive controllers.

4.2 Electrical connections - independent of the drive controller type

Details connector designations and provides a total connecting diagram for drive controllers.

5 ECODRIVE03 DKC**.3-016

5.1 Technical Data

Presents technical specifications for the DKC**.3-016 drive controller, including dimensions and electrical data.

5.2 Electrical connections

Details electrical connections for the DKC**.3-016, including connector designations and wiring diagrams.

6 ECODRIVE03 Auxiliary Bleeder Module BZM01.3

6.3 Electrical Connections BZM01.3

7 ECODRIVE03 Auxiliary Capacitance Module CZM01.3

7.3 Electrical Connections of CZM01.3

9 DC24 V NTM power supplies

11 Mains Connections

11.2 The Ground Conditions of the Power Supply Network

11.4 Control Circuits for the Mains Connection

12 Constructing the Control Cabinet

12.2 Using Cooling Units in the Control Cabinet

15 Replacing or Exchanging Drive Components

15.2 Procedure on Replacing the Unit

Provides step-by-step instructions for replacing drive units, including safety precautions and parameter reloading.

Replacing the drive controller

Details the procedure for replacing the drive controller, emphasizing de-energization and capacitor discharge.

Replacing the Motor

Outlines the steps for replacing the motor, including safety checks and mechanical replacement.

15.3 Replacing Firmware (DKC**.3-040;100;200-7-FW)

18 Service & Support