Need help?Do you have a question about the Rexroth Indramat DKC02.3-040-7 and is the answer not in the manual?
Description of the ECODRIVE03 digital intelligent automation system for single and multiple axis drive tasks.
Diagram and explanation of the components within the ECODRIVE03 family, including necessary parts.
Overview of communications interfaces and supported measuring systems for ECODRIVE controllers.
Guidelines for the correct and intended use of Rexroth Indramat products, emphasizing safety.
Definition and examples of inappropriate use of drive controllers to avoid property damage or injury.
Introduction to safety instructions for preventing bodily harm or material damage during equipment startup.
Explanation of hazard seriousness degrees (DANGER, WARNING, CAUTION) according to ANSI Z535.
Details specific hazards associated with improper use, such as high voltage, dangerous movements, and hot surfaces.
General information regarding product use, personnel qualifications, approved parts, and environmental conditions.
Safety measures for preventing contact with live electrical parts and high voltages.
Guidelines for connecting equipment to terminals with voltages between 0 and 50 Volts.
Information on preventing dangerous movements caused by faulty control, wiring, or component malfunctions.
Health hazards for persons with pacemakers or metal implants from magnetic fields near electrical equipment.
Safety precautions regarding hot surfaces and components to prevent burns.
Safety instructions for handling and mounting parts and components to prevent injuries.
Safety guidelines for handling and disposing of batteries, including potential hazards.
Safety instructions for handling systems with pressurized media like air or hydraulic oil.
Provides detailed technical specifications including dimensions, electrical data, and environmental conditions.
Description of the ECODRIVE03 digital intelligent automation system for single and multiple axis drive tasks.
Diagram and explanation of the components within the ECODRIVE03 family, including necessary parts.
Overview of communications interfaces and supported measuring systems for ECODRIVE controllers.
Guidelines for the correct and intended use of Rexroth Indramat products, emphasizing safety.
Definition and examples of inappropriate use of drive controllers to avoid property damage or injury.
Introduction to safety instructions for preventing bodily harm or material damage during equipment startup.
Explanation of hazard seriousness degrees (DANGER, WARNING, CAUTION) according to ANSI Z535.
Details specific hazards associated with improper use, such as high voltage, dangerous movements, and hot surfaces.
General information regarding product use, personnel qualifications, approved parts, and environmental conditions.
Safety measures for preventing contact with live electrical parts and high voltages.
Guidelines for connecting equipment to terminals with voltages between 0 and 50 Volts.
Information on preventing dangerous movements caused by faulty control, wiring, or component malfunctions.
Health hazards for persons with pacemakers or metal implants from magnetic fields near electrical equipment.
Safety precautions regarding hot surfaces and components to prevent burns.
Safety instructions for handling and mounting parts and components to prevent injuries.
Safety guidelines for handling and disposing of batteries, including potential hazards.
Safety instructions for handling systems with pressurized media like air or hydraulic oil.
Provides detailed technical specifications including dimensions, electrical data, and environmental conditions.
General| Series | DKC |
|---|---|
| Manufacturer | Rexroth Indramat |
| Power Rating | 4 kW |
| Output Power | 4 kW |
| Control Type | Digital |
| Protection Class | IP20 |
| Input Voltage | 3 x 400...480 VAC |
| Supply Voltage | 3 x 400 V AC |
| Communication Interface | SERCOS, CANopen |
To Next Page