Need help?Do you have a question about the Rexroth Indramat DKC11.3-200-7 and is the answer not in the manual?
Guidelines for correct and safe use of Rexroth Indramat products, including prerequisites.
Defines and provides examples of inappropriate usage scenarios for drive controllers.
Emphasizes reading safety instructions before startup to prevent harm or damage.
Lists common hazards like electric shock, dangerous movements, and burns from improper use.
Safety measures to prevent contact with live parts and risks of high voltages.
Safety guidelines for low-voltage connections (0-50 Volts) to prevent electric shock.
Measures to prevent injury from unintended machine movements, including monitoring and physical barriers.
Precautions regarding hot surfaces to prevent burns.
Safety guidelines for handling and mounting to prevent injury.
Discusses operation on three-phase networks and overvoltage protection in ungrounded networks.
States earth-leakage circuit breakers are not usable and describes alternative protection.
Explains recommended control circuits and the "Ready to operate Bb" signal function.
Guidance on selecting mains contactors and fuses, including inrush current computation.
Key planning considerations for control cabinets, including dimensions and thermal aspects like power dissipation.
Guidelines for using cooling units to manage ambient temperature and prevent condensation.
Notes on ESD, signal routing, high voltage tests, and connecting/disconnecting with mains power.
Lists included components for DKC**.3-016 and DKC**.3-040/100/200-7-FW.
Step-by-step instructions for replacing the drive controller, motor, and cables with safety precautions.
Procedures for replacing parameter and firmware modules using the programming module.
Steps for replacing firmware on DKC**.3-016 using DOLFI and IBF files.
Guidelines for correct and safe use of Rexroth Indramat products, including prerequisites.
Defines and provides examples of inappropriate usage scenarios for drive controllers.
Emphasizes reading safety instructions before startup to prevent harm or damage.
Lists common hazards like electric shock, dangerous movements, and burns from improper use.
Safety measures to prevent contact with live parts and risks of high voltages.
Safety guidelines for low-voltage connections (0-50 Volts) to prevent electric shock.
Measures to prevent injury from unintended machine movements, including monitoring and physical barriers.
Precautions regarding hot surfaces to prevent burns.
Safety guidelines for handling and mounting to prevent injury.
Discusses operation on three-phase networks and overvoltage protection in ungrounded networks.
States earth-leakage circuit breakers are not usable and describes alternative protection.
Explains recommended control circuits and the "Ready to operate Bb" signal function.
Guidance on selecting mains contactors and fuses, including inrush current computation.
Key planning considerations for control cabinets, including dimensions and thermal aspects like power dissipation.
Guidelines for using cooling units to manage ambient temperature and prevent condensation.
Notes on ESD, signal routing, high voltage tests, and connecting/disconnecting with mains power.
Lists included components for DKC**.3-016 and DKC**.3-040/100/200-7-FW.
Step-by-step instructions for replacing the drive controller, motor, and cables with safety precautions.
Procedures for replacing parameter and firmware modules using the programming module.
Steps for replacing firmware on DKC**.3-016 using DOLFI and IBF files.
General| Brand | Rexroth Indramat |
|---|---|
| Model | DKC11.3-200-7 |
| Category | Controller |
| Language | English |
To Next Page