3-4 Safety Instructions for Electric Drives and Controls Rexroth IndraDrive C
DOK-INDRV*-HCS02.1****-PR02-EN-P
• Operation is only permitted if the national EMC regulations for the
application are met.
The instructions for installation in accordance with EMC requirements
can be found in the documentation "EMC in Drive and Control
Systems".
The machine or installation manufacturer is responsible for
compliance with the limiting values as prescribed in the national
regulations.
• Technical data, connections and operational conditions are specified in
the product documentation and must be followed at all times.
To Next Page
Loading...
Need help?
General
