MicroLite Receiver User Manual
Revision 1.1 28
Proprietary Information and Disclaimer Notice
All information and graphic images contained within this manual are the sole property of IMT, LLC, and are
issued in the strictest of confidence. This material may not be reproduced, stored, copied, or converted in any
form, nor shall it be disclosed to others or used for manufacturing or any other purpose without the written
permission of authorized IMT personnel.
IMT has made every effort to ensure the accuracy of this material at the time of printing. However, as the
specifications, equipment, and this manual are subject to change without notice, IMT assumes no responsibility
or liability whatsoever for any errors or inaccuracies that may appear in this manual, or for any decisions based
on its use. This manual is supplied for informational purposes only and should not be construed as a
commitment by IMT.
Warranty
Equipment manufactured by IMT, LLC is warranted to meet all published specifications and to be free from
defects in material and workmanship within a period of two years from date of original shipment. The
company’s liability under this warranty is limited to:
Servicing or adjusting equipment.
Replacement of defective parts.
Any equipment returned to the factory shall have the freight paid for by the buyer.
Equipment showing damage by misuse, abnormal conditions of operation, or attempts to repair by other than
authorized service personnel shall be excluded from this warranty. IMT shall in no event be responsible for
incidental injury or property damage. Since IMT has no control over conditions of use, no warranty is made or
implied as to suitability for the customer’s intended use, beyond such performance specifications as are made
part of the purchase order. There are no warranties expressed or implied, except as stated herein. This
limitation on warranties shall not be modified by verbal representations.
Shipping Damage
Equipment shipped FOB IMT shall become the property of buyer upon delivery and receipt from carrier. Any
damage in shipment should be handled by the buyer directly with the carrier. Immediately request the carrier’s
inspection upon evidence of damage in shipment.
Field Service
IMT products are designed with easy access to components to facilitate service. However, some modules
cannot be service in the field. To prevent voiding of the warranty, please contact Tech Support before servicing
or making any repairs. The user is cautioned to read all module descriptions in this manual. Warnings are
included in the circuit descriptions and on certain modules themselves.
Replacement Modules
Troubleshooting to the component level is often not cost-effective and frequently impossible. Often the
practical method of effecting repairs is to substitute known good spare modules for suspect units. Replacement
modules for our standard product line are usually available.
To Next Page
Loading...
