RF Mogul EAGLE RE-1 User Manual

6
What you wish you had
Pre-installation recommendations for the RF Mogul Eagle Controller to a
MotoSAT mount...
1. The ability to receive Email and download files from an Email.
2. Know how to put files on a USB Flash Drive from your computer.
3. Read and follow wiring instructions.
4. Cannot be color blind.
5. A basic Volt/Ohm Meter.
6. One small screw driver for use on the 12 position control cable connector.
7. Flashlight
Recommended Tools for the RF Mogul Eagle to MotoSAT Upgrade
1. #2 Phillips screwdriver
2. 7/16 Open End Wrench
3. Pliers
4. Knife
5. Volt Ohm Meter
6. Inside assistant
Other possible item needed for install
1. SWM DirecTV 21 Volt Power Inserter for SWM applications
2. Drill for roof GPS installation
3. 100% Silicone or Dicor roof sealant
4. Threaded Reed switches
5. 3M Scotchloks (UR2 IDC Home Depot) for wire splicing

RF Mogul EAGLE RE-1 Specifications

General

Brand	RF Mogul
Model	EAGLE RE-1
Category	Controller
Language	English