Menus and Operation
Your controller is menu driven. By selecting a particular menu you can perform
many functions besides just "SEARCHING for satellite".
TO SEARCH
• Press Power button
o Displayed will be the....
▪ System configuration (software configuration)
▪ Version of software i.e. 14-02-07
▪ Options
• SEARCH (up arrow)
• STOW (down arrow)
• MENU (press "SELECT" which is the POWER button, again
to enter menu)
TO ENTER MENU
• Press the Power button again after turning ON the power to enter the
"menu" portion of your system.......
o Displayed will be the Up and Down arrows which will help you
navigate through the menu. Once the portion of the menu that
you want is displayed, press SELECT (power button) to "select"
that option....
• 1: shutdown - will turn OFF your controller
• 2: search - will direct the mount to search for your specific
satellite that is specified in your system configuration
• 3: stow - will cause the mount to return to its travel position
• 4: move azimuth - pressing and holding the appropriate
button will manually move your mount in azimuth (Up arrow
CLOCKWISE, Down arrow COUNTERCLOCKWISE
HD Mounts
• ms HD SHAW Dual & Triple = Dual or Triple Satellite xKu LNB
• ms HD DirecTV SWM = DirecTV SWM 3 LNB or 5 LNB
• ms HD Dish Network = Dish Network Triple Satellite 1000.2 LNB
• ms HD Bell TV = Bell TV Triple Satellite 1000.2 LNB
• ms HD DirecTV SL5 = DirecTV Slim Line 5 LNB
18 " Mounts
• ms 18" DirecTV = DirecTV Single Satellite
• ms 18" Dish Network = Dish Network Single Satellite
• ms 18" Bell TV = Bell TV Single Satellite
To Next Page
Loading...
Need help?
General