RFDesign RFD TXMOD - Page 16

RFD TXMOD User Manual
www.rfdesign.com.au
– Version 1.2 – Status – Issued for use
Document Number – PRJ-TXM-MAN-001
Page
15
Figure 12 - TXMOD modem configuration page.
- Settings can be refreshed using the ‘Load Fresh Parameters’ button.
- Parameters can be adjusted in the text boxes as required
- Apply changes using the ‘Save Params’ button. Note: Changes on the AIR_SPEED, NETID,
MIN_FREQ, MAX_FREQ and NUM_CHANNELS parameters should be applied to remote radio settings
as well to avoid losing the radio link.