pcProx
®
and AIR ID
®
Enroll Readers
Configure pcProx Templates
The application allows you to save templates
(.HWG files) representing your configuration
choices for retrieval at a later time. The
templates may also be used to auto-run the
application. To use the auto-run mode you need
to save a template file and specify this as a
command line parameter (See Auto-Run
Operation section below).
Configuration Choices
There are many configuration setting choices in
Allows the user to
1. Choose between the pcProx operating
as a keyboard or as an embedded
device requiring the SDK,
2. Specify which bits read from the pcProx
reader are used to construct the ASCII
number,
3. Specify if any additional keystrokes are
added to the ASCII number when it is
sent to the keyboard buffer,
4. Set the data to a fixed length, and
5. Set various timing parameters.
To Next Page
Loading...