pcProx
®
and AIR ID
®
Enroll Readers
password field will be filled in by the information
read from the card or token.
If higher security is desired, the password can
be made up of the proximity token data plus a
user supplied PIN. This creates a two-factor
authentication system (something you have and
something you know) and protects against lost
or stolen password.
Configuration Utility
The following screen shot shows the
configuration program supplied with the reader.
This program simply configures the reader.
Once the configuration information is set and
written to the device, the device is ready for
deployment. The device will hold this
information until it is updated.
Please refer to the User’s Guide for details on
the usage of this application.
The reader has internal storage memory that
may be configured using the supplied
configuration utility. This may be useful in
sending additional keystrokes such as a TAB, or
ENTER either before or after the card data.
However, it is best to have no appending keys
configured until you have reset all of your
desired passwords using the card.
To Next Page
Loading...