16
© 1998-2005 RF IDeas, Inc.
Get/Set Internal Timing
Data is valid for
The time the card ID remains valid in the device.
Once this time elapses, the card data is
discarded. The minimum value is 900.
Inter-key 'Press' time
Sets USB inter-key Press' time delay in msecs.
This is how long the key is held down.
Inter-key 'Release' time
Sets USB inter-key 'Release' time delay in
msecs. This is the delay between keystrokes.
Send Data Upon Read
Immediately sends the card data otherwise it is
held based on the lock-out time below.
To Next Page
Loading...