pcProx
®
and AIR ID
®
Enroll Readers
Advanced Tab
LED Control
SDK Controls LED
Using the SDK the software developer has the
ability to control the red/green/amber colors of
the LED on the top of the reader.
Normally, the reader goes from red to green
when a proximity card is read (i.e. a proximity
card being read by a pcProx or AIR ID Enroll
reader). This can be restricted by the bit count.
For example, if the user configures the reader to
‘read only 26 bit cards’ the LED will go green
when any HID 26 bit card is placed on the
reader. A HID 34 bit card, will not turn green.
Selecting this feature will cause the LED colors
to come under the control of the SDK, not the
independent card reading function.
To Next Page
Loading...