20
© 1998-2005 RF IDeas, Inc.
3 special characters (hex 01, 02, 03) that can be
specified. These add an extra measure of
difficulty in reproducing card data directly from
the keyboard. It may be useful when using the
proximity reader as a logon device. Please see
application note for more details.
Strip Trailing Parity bit count
The indicated number of Trailing Parity bit(s) are
ignored. There is typically only 1 trailing parity
bit.
The following keystrokes are sent ahead of card
data
You may specify up to 2 keystroke characters
that will be inserted in front of the card data.
Note there are 3 special characters (hex 01, 02,
03) that can be specified. These add an extra
measure of difficulty in reproducing card data
directly from the keyboard. It may be useful
when using the proximity reader as a logon
device. Please see application note for more
details.
Disable appending keystroke
This checkbox tells the device to not append a
character to the end of data.
This keystroke appended to data
If the previous checkbox is not selected, this
character will be appended to the data. Note
there are 3 special characters (hex 01, 02, 03)
that can be specified. These add an extra
measure of difficulty in reproducing card data
directly from the keyboard. It may be useful
when using the proximity reader as a logon
device. Please see application note for more
details.
To Next Page
Loading...