RGBlink Mini - Page 17

mini User Manual
17
3.1.5 IP Setting
3.1.6 Language
1.Push MENU and rotate and push「Y」knob to
enter the seventh menu item<LANGUAGE>
Push MENU,rotate and push
「
Y
」
knob to enter the
sixth menu item<IP SETTING>
SET IP Address Manually
Select each segment with the
「
Y
」
knob, then
press to enter and set the value of each segment
by pressing the knob again.
Set IP Address Automatically
Use this setting if your network/router has a D
HCP server
Select DHCP and set to ON,manual setting is di
sabled, and the IP Address for mini is set from
the network.
Note: After setting IP address manually, please restart the device.
2.Rotate and push「Y」knob to select
Chinese and English.