mini User Manual
3.2 S Button
When you want to personalize your live show, you can use the mini's 14 built-in switching effects and control the
timing of the switch via T-BAR.
1. Push S button once to enter mode switch menu<MODE> and the LED indicator beside will light up
2. Push S button twice to enter mode switch menu<MODE> and the LED indicator beside will light up;
3.
Push
S
button
three times to
enter
menu
<PIP>
and
the
LED
indicator
beside
will
light
up;
4. Push S button four times to preview 4 inputs and the LED indicator beside will light up;
Each time the menu is opened, the corresponding indicator light will be on, and then rotate the PUSH knob (" Y ")
to select and confirm.
3.2.1 MIX
Press S button to enter transition effect menu<MIX>,there are 14 kinds of effects
To change the switching effect, proceed as follows.
To Next Page
Loading...
Need help?
General
