mini User Manual
3.2.2 MODE
Push S button twice to enter <MODE>menu,and rotate 「Y」knob to select FAST or T-BAR
After selecting Quick Cut, you need to select the switching time: from 0.5s to 5.0s.
The steps are as follows.
Note ： In actual use, the hard cut is only available in Quick Cut mode, if you use T-Bar mode, it will
automatically change to FADE.
1.Push S button to enter transition effect
menu<MIX>
Transition effect as picture above
3.Press knob Y to confirm
2.Turn knob Y to select transition effect
1.Press the "S" button twice to enter the
mode interface.
Mode include Fast and T-Bar
To Next Page
Loading...
