Installation
Thermostat
Overview
Thermostat
Setup
Advanced
Installer Menu
14 Installer’s Guide
Equipment
User Menus
Choose the System Setting
From the Home screen, press the button as shown
to choose the system setting: Heat, EM, Cool, Auto,
or Off.
Energy Saving Factory Pre-Program
Your thermostat is programmed from the factory with the energy saving settings shown
below for every day of the week. If this program meets your needs, simply select either
Heat, Cool, or Auto with the System button.
Factory Pre-Programmed Heating and Cooling Schedule
If you want to change the heating and/or cooling programs in your thermostat, see
the “Programming Your Thermostat” section in the Homeowner’s Guide.
Wake Up
(Morning)
Leave for Work
(Day)
Return Home
(Evening)
Go to Bed
(Night)
Heating Program 6:00 AM 70
o
F 8:00 AM 62
o
F 5:00 PM 70
o
F 10:00 PM 62
o
F
Cooling Program 6:00 AM 75
o
F 8:00 AM 83
o
F 5:00 PM 75
o
F 10:00 PM 78
o
F
To Next Page
Loading...
