Rheem Comfort Control2 - Air Conditioner User Menus

Installation
Thermostat Overview
Thermostat Setup
Advanced Installer Menu
Installer’s Guide  35
Equipment User Menus
Fault History (FAULT HIST)*
Fault Code Fault Occurred Comments
XXXXXXXXXXXXXXX Days XX
Displays up to 6 faults; Days (XX)
indicates how many days ago the fault
occurred
Clear Faults No, Yes
*Status and Fault History also available on tandem unit Compressor 2 menu.
Air Conditioner User Menus
Status*
Parameter Options Comments
Compressor Off, On Compressor Status
Mode
AC, AC1, AC2,
Time Delay, Off
System Mode of Operation
Comp Hi Pres SW Closed, Open AC High Pressure Switch Status
Comp Lo Pres SW Closed, Open AC Low Pressure Switch Status
Outdr Temp Sens
(if enabled)
XXXF, FLT
Outdoor Ambient Temperature Display
(if installed and enabled in setup)
This option will not appear unless the
sensor is enabled