Rheem Comfort Control2 - Page 19

Installation
Thermostat Overview
Thermostat Setup
Advanced Installer Menu
Installer’s Guide  19
Equipment User Menus
Heat Cycle Rate - Anticipation for heat cycle can be
adjusted. Default setting is Medium. If you wish to have
longer heat cycles, change to Slow. For shorter heat
cycles change to Fast.
Cool Cycle Rate - Anticipation for cool cycle can be
adjusted. Default setting is Medium. If you wish to have
longer heat cycles, change to Slow. For shorter heat
cycles change to Fast.
Humidity Display Adjust - Default is 0%. This
option allows you to change the humidity displayed to
match other thermostats in your home.