Rheem Comfort Control2 - Page 23

Installation
Thermostat Overview
Thermostat Setup
Advanced Installer Menu
Installer’s Guide  23
Equipment User Menus
Furnace User Menus (cont.)
Status 2
Parameter Indications Comments
Mode
Mod Heat, Lo Heat,
Hi Heat, AC1, AC2,
Fan Only, Off, HP1,
HP2
Indicates Operating Mode of System
Motor Mfgr Regblt, Emerson Blower Motor Manufacturer
Motor RPM RPM Blower Motor RPM
Maximum CFM CFM XXXX Maximum CFM Blower Provides
Blower CFM CFM XXXX Displays Current Operating CFM
Temp Rise NA, XXXF
Difference between the Supply and
Return Air Temperature
Return Temp XXXF, FLT Displays Return Air Temp (if installed)
Supply Temp
NA, (If disabled),
XXXF, FLT
Displays Supply Air Temp (if installed
and enabled in setup)
HUM Output On, Off Humidifier Output Relay Status
EAC Output On, Off
Electronic Air Cleaner Output Relay
Status