Installation
Thermostat
Overview
Thermostat
Setup
Advanced
Installer Menu
26 Installer’s Guide
Equipment
User Menus
Furnace User Menus (cont.)
Unit Info
Parameter Indications Comments
Model Number
XXXX-
XXXXXXXXXXXXXXXX
Unit Model Number
Serial Number XXXXXXXXXXXXXXXXXXX
Unit Serial Number (Not available
if control is replaced)
Software Vers XXXXXX Control Software Version
Setup
Parameter Options Comments
Heat Rise Adjust 55F, 65F Change airflow to adjust heat temperature rise
Min Heat Adj % -15, -7, 0, 7, 15
Selectable Airflow Adjustments at 40% Firing
Rate
Max Heat Adj % -15, -7, 0, 7, 15
Selectable Airflow Adjustments at 100% Firing
Rate
Supply Air Sens On, Off
Factory default is On, if Sensor is not installed
turn Off
Reset All Dflts No, Yes
Resets the Furnace to the Factory Default
Configuration by selecting Yes
To Next Page
Loading...
